Re: SnapCenter 6.0 - proxy issue
Hello. We have a case opened with Netapp support for quite a long time and we're working to find a solution. For the moment the root cause is still not known.
View ArticleClik here to view.
Re: Backup snapshots from a NetApp appliance to a NetApp cluster
You are required to add license, establish cluster peer, vserver peer, intercluster lif, ensure ontap version compatibility, and implement snapshot mirroring for all snapshots. The following is the...
View ArticleRe: Backup snapshots from a NetApp appliance to a NetApp cluster
Liu, you are correct, if the source is not part of their own cluster. If they are part of their own cluster, you can follow the table you presented to upgrade and then mirror. If not, NetApp XCP may...
View ArticleRe: Monitor snapmirror/snapvault state from source
First of all, use the command snapmirro status in 7-mode. The information is not visible at the source end. Only the destination end can see whether the transmission is in progress or the transmission...
View ArticleRe: SnapCenter 6.0 - proxy issue
HelloWe can try some possible options to avoid the use of the proxy: A.- Remove a proxy server from the snapcenter host using the netsh command:Open admin cmd prompt on the SnapCenter hostType netsh...
View ArticleRe: Freeing up space on busy snapmirror snapshot
I hope you found this connection helpful：https://kb-cn.netapp.com/on-prem/ontap/dp/SnapMirror/SnapMirror-KBs/Snapshot_delete_fails_with_error_Snapshot_copy_has_not_expired_or_is_locked
View ArticleRe: Freeing up space on busy snapmirror snapshot
You need to disconnect the replication relationship before using:"snapmirror release" frees up your space
View ArticleRe: Svm-dr move the ports. Getting an error
There are no ports assigned to the broadcast domain in the IPSpace DR CONFIG REPLICATION FAILED - Error: Cannot find ports in IPspace - NetApp Knowledge BaseDifferent ports are assigned to the...
View ArticleRe: DestinationVol NFS mount : denied on ESXi by permission
If you want to temporarily mount the volume, you can pause the relationship with snapmirror quiesce, then disconnect the relationship with snapmirror break, and then mount the mount-volume to a...
View ArticleSnap Center plugin for vSphere and mixed protocols FC and iSCSI
Hi!I am thinking of installing the snapcenter plugin for vSpherere in an environment where the main datacenter storage is served via FC and the DR site would have iSCSI connectivity.The question is if...
View ArticleRe: How to replace a disk from another Netapp
skneo is right,When adding larger drives to an existing RAID group of smaller drives, the larger drives will be right sized to match the usable capacity of the smaller drives.Does ONTAP allow mixing of...
View ArticleFpolicy question regarding Fpolicy Stubs and Veeam integration
Hello All, We are using an archiving (HSM) solution where the archiving application uses NetApp Fpolicy. After migrating files off a NetApp smb share to s3 storage, the fpolicy engine leaves a stub at...
View ArticleRe: Fpolicy question regarding Fpolicy Stubs and Veeam integration
There should be an option in Veeam to skip links or symbolic links. However, the product is performing the way it should; the stub should be resolved, and the data retrieved from archive and backed...
View ArticleRe: Fpolicy question regarding Fpolicy Stubs and Veeam integration
Hello Tas,Thanks for the reply. Unfortunately veeam does not have the functionality to filter/ Skip symbolic links. In case of Fpolicy the stub is a sparse file that has the SMB offline bit set. Veeam...
View ArticleDoes deleting a source snapshot that is mirrored and used at destination for...
> version NetApp Release 9.15.1P51. I have a snapmirror relationship and I manually mirrored a snapshot "test5" from source to destination using the below command.Dest > snapmirror -update...
View ArticleRe: Snap Center plugin for vSphere and mixed protocols FC and iSCSI
Hi Francisco, I wanted to clarify my understanding of the issue at hand. From what I gather, you would like to use SnapCenter (SCV) to mount snapshots from the DR site storage system to the Primary...
View ArticleRe: Does deleting a source snapshot that is mirrored and used at destination...
Please let me know if you want any further information on the topic.
View ArticleRe: Does deleting a source snapshot that is mirrored and used at destination...
What is the policy used for the snapmirror?can you check the snapshots on the destination, do you still see test5?
View ArticleRe: Does deleting a source snapshot that is mirrored and used at destination...
Snapmirror Policy is MirrorAllSnapshots> SnapMirror Policy: MirrorAllSnapshotsYes, the snapshot test5 exists in destination.Vserver Volume Snapshot Size Total% Used%-------- --------...
View ArticleRe: Does deleting a source snapshot that is mirrored and used at destination...
in your case, the "test5" was manually mirror SS, not the baseline. So its deletion won't disrupt the relationship. >>> snapmirror showProgress Source Destination Mirror Relationship Total...
View Article